Installing our Rock Sliders

The installation of our rock sliders is fairly simple.

Remove the nuts under the mounts under the Jimny, and remove the large washers that come with them.  Leave the rubber bushes in there.

Install the rock slider, add a provided washer and the nut that you first took off. If there are two different sized washers, use the larger one on the front. 

The large washers that came off the car stay off, store them somewhere safe.

IMPORTANT: Make sure to do the nuts up nice and tight. If there is vibration or rattling sounds when you are driving, they need to be tighter. This is because of the rubber bush amount the rock slider, they compress a lot, but they are fairly solid.