Installing Recovery Points on a Jimny

Adding our Recovery Points to your Jimny is a fairly quick job, and makes recovering your Jimny far safer and easier.

Front Right (drivers side):

The drivers side recovery point comes with a small plate that bolts to the inside of the tiedown loop. The tubular part of the Recovery Point slides into the chassis rail, this is what creates the strength of these recovery points.

Left Side (passenger side):

The passenger side recovery point is also using the chassis rail for it's strength, and has 3 bolts that hold it in place.

NOTE: the pics below show a bolt that is missing from this car. Not a great demo! Will update these pics ASAP. 

The bottom bolt has a large steel washer and a spacer that goes between the recovery point and the large steel washer.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us